Lightful UV Blue Adhesive

Cure time — 0.5 seconds at lamp level 5, from the moment the light hits it (lower levels cure, but need longer)

Hold time — 10–12 weeks

Viscosity — Medium Thin

Color — Light blue in the bottle, invisible on the lash

Size — 5mL / 0.17oz

Odor — Low

Optimal humidity — None required. The lamp cures it, not the room.

Shelf life — 12 months unopened · replace every 2–3 months once opened

Store cool, dry and well-ventilated, out of direct sunlight, away from moisture

Requires a 395–405nm UV-LED lamp

• Bottle of adhesive × 1
• Nozzle Pin × 1
• Extra nozzle × 1
• Moisture Pack

Wait — it's blue?

In the bottle, yes. On the lash, no. It's a transparent blue,no blue lash line, nothing to warn your client about. Think of it as a clear adhesive that happens to be easier to spot on your tile.

How long do I actually hold the light on it?

Half a second at level 5, the lamp's strongest setting. On a lower level it still cures, it just needs longer — so don't count to one and move on because you read "0.5 seconds" somewhere. An under-cured bond looks identical to a cured one until week three.

Can I use my nail lamp?

No. Lightful Blue is formulated for 395–405nm UV-LED. 365nm nail lamps may eventually cure it, but far slower and with an unstable result — meaning you don't actually know what you've got holding that extension. The half-second cure needs a high-intensity 395–405nm UV-LED, which is exactly what the Lightful Lamp is.

Is it beginner-friendly?

Arguably it's the most beginner-friendly adhesive there is. Every "my fan closed / my glue flashed / I placed it crooked and it was already set" problem is a timing problem, and this removes the timer. Take ten seconds to place a fan if you want to. Nobody's watching.

Do I still need my regular adhesive?

Most of you will run both, and I'd expect that. Lightful Blue is for control — placement, premades, the days the humidity is against you. Poker Face and Black Jack are still on the shelf for the client you've done forty times. Different tools. Nothing is being replaced.

Is it safe for clients who are sensitive to regular lash glue?

Treat it exactly like any cyanoacrylate adhesive — same ventilation, same patch-test conversation, same care. It's low-odor and it isn't classified as a hazardous substance, but "UV" doesn't mean "hypoallergenic," and I'm not going to imply it does.

Material Safety Data Sheet — Report No. HS202512012521R, Shenzhen Huasheng Testing Technology, issued December 1, 2025.

Composition: ethyl cyanoacrylate (CAS 7085-85-0) 80–90%, poly(methyl methacrylate) (CAS 9011-14-7) 5–10%, photoinitiator (CAS 270586-78-2) 0.5–1%.

Not classified under EU CLP Regulation (EC) No 1272/2008 — no pictogram, signal word or hazard statement required. Classified non-dangerous goods for sea, air, road and rail transport. Not flammable.

Full documentation available on request.

One still-open blank on this page: the optimal temperature range, which is the only spec the SDS didn't give. If your glue supplier has it, send it and I'll slot it into Details. Otherwise leave it out rather than guess — the humidity line is doing the important work anyway.